Keybar - Key Smart
-
Key-Bar - Clip in Fibra di Carbonio - Accessorio KeyBar
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP -
Key-Bar - Prybar e Cacciavite in titanio - Accessorio KeyBar
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY -
Key-Bar - Titan Cutter Tool - KeyBar Zubehör
ZUBEHÖR, DAS INNERHALB IHRER SCHLÜSSELANHÄNGER ZU VERWENDEN IST
* Es hat Cutter und Cutter Funktionen
* Ausgestattet mit einem Schnellsplint
* Ausgestattet mit 10 Ersatzklingen, leicht austauschbar
* Aus Titan, mit Teilen aus rostfreiem Stahl
* Original Key-Bar-Zubehör
* Hergestellt in den USA
DIE MARKENPHILOSOPHIE
Die Philosophie hinter der Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: Tragen Sie Ihre Schlüssel täglich in der Tasche, ohne dass sie Lärm machen und sich überall bewegen, was unangenehm ist.
Es tritt dann in die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Leistungen in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key Bar. Ein kleine Scheibe Schlüsselbund, konfigurierbar nach Belieben, der die Tasten ermöglicht, um immer zu sein, nicht Lärm während des Transports zu emittieren und bequem in seiner eigenen Tasche oder an den Band verankert passen.
Die Entwicklung von Key-Bar hat gerade erst begonnen, aber ihr Potenzial ist enorm. In der Tat ist es möglich, zusätzliches Zubehör separat zu kaufen, zusammen mit den Schlüsseln, mit denen Sie ein kleines Mehrzweckwerkzeug erstellen können, das für jeden Fall jeden Tag bereit ist!
Zum Zusammenbauen und Konfigurieren Ihrer Key-Bar sind keine speziellen Werkzeuge erforderlich. Alle Griffe sind aus Vollmaterial und CNC-Werkbänken gefertigt und dann von Hand bearbeitet.
Jeder Key-Bar ist aus nicht eisenhaltigen Materialien hergestellt, während die Schrauben aus rostfreiem Stahl sind, um maximale Hygiene und extrem einfache Reinigung und Wartung zu garantieren.
Patentiert und komplett in Savannah, USA hergestelltKEY-CUT -
Key-Bar - Kit Estensione Viti - Accessorio KeyBar
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT -
Key-Bar - Clip Deep Carry 2.0 in titanio - Accessorio KeyBar
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP -
Key-Bar - Square - Portachiavi in Alluminio - con clip in titanio
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL -
Key-Bar - Slayer - Portachiavi in Titanio - con clip in titanio
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB -
Key-Bar - OD Green G10 - Schlüsselanhänger aus Aluminium mit Titanclips - G10-ODGRN
Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.
Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.
Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!
Griffmaterial: G10 und Aluminium
Grifflänge: 89mm.
Keyless-Gewicht: 34g.Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x TitanclipsKeine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.
Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.
Patentierte und ganz in Savannah, USA hergestellt
KEY-G10-ODGRN -
Key-Bar - Schwarz G10 - Schlüsselanhänger aus Aluminium mit Titanclips - G10-BLK
Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.
Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.
Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!
Griffmaterial: G10 und Aluminium
Grifflänge: 89mm.
Keyless-Gewicht: 34g.Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x TitanclipsKeine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.
Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.
Patentierte und ganz in Savannah, USA hergestellt
KEY-G10-BLK -
Key-Bar - schwarz eloxiert - Schlüsselanhänger aus Aluminium mit Titanclips - BLK-ANOAL2
Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.
Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.
Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!
Griffmaterial: Aluminium eloxiert
Grifflänge: 89mm.
Keyless-Gewicht: 40g.Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x TitanclipsKeine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.
Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.
Patentierte und ganz in Savannah, USA hergestellt
Besteck Collini von Busto Arsizio ist der offizielle Händler für Italien der Key-Bar Marke
KEY-BLK-ANOAL2 -
Key-Bar - Weiß / Schwarz Cerakoated - Schlüsselanhänger aus Aluminium mit Titanclips - WHTBLK-CKAKB
Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.
Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.
Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!
Griffmaterial: Aluminium eloxiert
Grifflänge: 89mm.
Keyless-Gewicht: 40g.Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x TitanclipsKeine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.
Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.
Patentierte und ganz in Savannah, USA hergestellt
Besteck Collini von Busto Arsizio ist der offizielle Händler für Italien der Key-Bar Marke
KEY-WHTBLK -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB -
Key-Bar - Accessorio Pettine in titanio
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB -
Key-Bar - Portachiavi in Titanio con clip in titanio
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar - Portachiavi in Carbonio e titanio con clip in titanio
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB -
Key-Bar - Portachiavi in Carbonio ed Alluminio con clip in titanio
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB -
Key-Bar - Portachiavi in Alluminio con clip in titanio
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB