Jagdmesser: Zuverlässigkeit und Langlebigkeit in der Natur

MESSER AUS EINER PRIVATSAMMLUNG
* Typ: Zuvor gekauft 
* Zustand: Sehr guter Zustand
* Schärfung: Original
* Markierungen auf der Klinge: Keine
* Markierungen auf dem Griff: Keine
* Verpackung: -
* Scheide: original, Leder, in sehr gutem Zustand
* Handbücher, Zertifikate und Garantien: - - * Geprüft und zertifiziert durch unser hauseigenes Labor.
* Geprüft und zertifiziert durch unser hauseigenes Labor

Das Randall Model 1 Fighter war eines der ersten Modelle, die in Randalls Werkstatt in Orlando hergestellt wurden. Ein von Bo Randall selbst gefertigtes Modell 1 diente als Prototyp für das Springfield Randall, das von der Northampton Cutlery Company in der Nähe von Springfield, Massachusetts, in den Jahren 1943 und 1944 für das US-Militär hergestellt wurde.

Verwendungszweck: taktisch / militärisch

Art der Herstellung: handgefertigt
Herstellungsland: USA
Klinge: Voller Erl aus rostfreiem Stahl 440B
Klingenfinish: satinierte Oberfläche
Griff: Messing-Durchsteckschutz und monolithischer Micarta-Griff
Klingenlänge: 177 mm.
Dicke der Klinge: 5mm.
Gesamtlänge: 295 mm.
Balance: auf der Wache Zweig
Gewicht: 350g.
Scheide: Gürtel, schwarzes Leder
Anmerkungen: Zuvor gekauftes Messer, aus einer Privatsammlung zurückgezogen

Verwendungszweck: Kollektion / Outdoor

Klinge: Vollerl aus Edelstahl N680 bei 57 / 58HRC
Griff: Aus Metall
Klingenlänge: 170 mm.
Klingenstärke: 5 mm.
Gesamtlänge: 295 mm.
Gewicht: 367g.
Scheide: aus Polymeren und Cordura mit folgendem Zubehör:

* Skinner
* Wetzstein
* Survival-Kit beinhaltet:
- Angelausrüstung
- Flickzeug
- Skalpell
- Gewürze
- Pinzette

Verpackung: Karton mit Aitor-Logos

Bestimmungsgemäße Verwendung: Sammlung / Dienstprogramm

Art der Produktion: Industrie
Produktionsland: Taiwan
Klinge: aus Stahl D2
Klingenende: sandgestrahlt
Griff: G10
Klingenlänge: 173 mm.
Klingenstärke: 5mm.
Gesamtlänge: 324 mm.
Gewicht: 459 g.
Scheide: aus schwarzem Leder
Verpackung: Geschenkbox mit Garantieschein und Mikrofaser-Reinigungstuch
Anmerkungen: Limitierte und nummerierte Auflage von 1999 Exemplaren - Entwurf von Dietmar Pohl (Pohl Force)

Verwendungszweck: Jagd / Sport

Art der Produktion: Industrie
Produktionsland: Italien
Klinge: aus Becut 57 / 58HRC Edelstahl mit sehr hoher Beständigkeit gegen Oxidation und Korrosion
Klingenende: Schwarzer Idroglider
Griff: G10
Klingenlänge: 75mm.
Klingenstärke: 3mm.
Länge geschlossen: 125mm.
Gesamtlänge: 198 mm.
Im geschlossenen Zustand dick: 10,3 mm.
Gewicht: 129 g.
Schließen: Liner Lock
Clip: Edelstahl, abnehmbar, mit schwarzem Idroglider-Finish
Verpackung: Karton mit Fox-Logos
Anmerkungen: Design von Russ Kommer

Collini Cutlery ist offizieller Distributor der White River Knife & Tool Knives für Italien

Verwendungszweck: Jagd / Sport

Art der Produktion: Handwerker
Klingenproduktion: USA
Klinge: CPM-S35V 58 / 60HRC Edelstahl
Klingenbehandlung: -
Griff: Paracord
Klingenlänge: 75mm.
Klingendicke: 3mm.
Länge geschlossen: -
Gesamtlänge: 175mm.
Dick im geschlossenen Zustand: -
Ausgleich: -
Gewicht: 80g.
Abschluss: -
Clip: -
Scheide: in Kydex
Verpackung: Holzkiste mit WRKT-Logos
Anmerkungen: -

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

Verwendungszweck: Jagd / Sport

Art der Produktion: Artisan
Produktion Lama USA
Blade: CPM-S30V Edelstahl 58/60 HRC
Blade-Behandlung: Black
Griff: -
Klingenlänge : 73mm.
Klingenstärke : 3,5 mm.
Geschlossen Länge: -
Gesamtlänge : 153mm.
Dickes geschlossen: -
Balancing: -
Gewicht: 60g.
Geschlossen: -
Clip: -
Scheide: Kydex
Verpackung: Karton mit Logos WRKT
Hinweise: -

EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives Enzo

Intended Use: Sport / Hunting

Type of production: Industrial
Production Lama: Argentina
Blade: Stainless steel N695Co
Treatment Blade: Black Stone Washed
Handle: Micarta
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 133g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Boker Arbolito
Notes: -

Beretta K92 bullet knife

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel AUS-8
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 4mm.
Closed Length 125mm.
Overall length: 220mm.
Thick when closed: 14mm.
Balancing: -
Weight: 50g.
Lock: back lock
Clip: -
Sheath: -
Packaging: cardboard box with Beretta logos
Notes: -

Verwendungszweck: Jagd / Sport

Art der Produktion: Semi-Industrie
Lama-Produktion: Finnland
Klinge: CPM-S30V Edelstahl
Klingenbehandlung: -
Griff: Kohlefaser
Klingenlänge: 70mm.
Klingenstärke: 2mm.
Länge geschlossen: 93mm.
Gesamtlänge: 170mm.
Dick wenn geschlossen: 9mm.
Ausgleich: -
Gewicht: 82g.
Schließen: Keine Klingenarretierung - Rückhaltefeder
Clip: -
Scheide: -
Verpackung: Karton mit EnZo-Logos
Hinweise: Schärfen des gesamten flachen Typs

EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless CPMS30W
Treatment Blade: -
Handle material: carbon fiber
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Overall length: 178mm.
Thickness when folded: 7mm.
Balancing: -
Weight: 102g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Collini Cutlery is the distributor for Italy Enzo knives

EnZo - PK 70 - CPM-S30V - Carbon fiber - 2901 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle material: carbon fiber
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 86g.
Closure: Without Lock Blade - retention spring back
Clip: -
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening Flat type
Notes: Collini Cutlery is the distributor for Italy Enzo knives

Collini Cutlery ist offizieller Distributor der White River Knife & Tool Knives für Italien

Verwendungszweck: Jagd / Sport

Art der Produktion: Handwerker
Klingenproduktion: USA
Klinge: CPM-S35V 58 / 60HRC Edelstahl
Klingenbehandlung: -
Griff: Paracord
Klingenlänge: 75mm.
Klingendicke: 3mm.
Länge geschlossen: -
Gesamtlänge: 175mm.
Dick im geschlossenen Zustand: -
Ausgleich: -
Gewicht: 80g.
Abschluss: -
Clip: -
Scheide: in Kydex
Verpackung: Holzkiste mit WRKT-Logos
Anmerkungen: -