Jagdmesser: Zuverlässigkeit und Langlebigkeit in der Natur
-
Viper - Lille 1 Fixed Knife by Vox - Elmax Carbon Fiber - VT4022FC - Messer
Verwendungszweck: Sportlich / Jagd
Produktionsart: Industriell
Land der Produktion: Italien
Klinge: Voller Erl aus Elmax SuperClean 59/61HRC rostfreiem Stahl
Klingenausführung: Satiniert
Griff: Kohlefaser
Klingenlänge: 67 mm.
Dicke der Klinge: 3,5 mm.
Gesamtlänge: 167 mm.
Gewicht: 100 g.
Scheide: Kydex, mit UltiClip Befestigungsclip
Verpackung: Pappkarton mit Viper-Logos
Anmerkungen: Entwurf von Jesper VoxnaesVT4022FC -
Cold Steel - Bowie Blade Bushman - 95BBUSK - messer
Cold Steel - The Bushman - 95BBUS Bowie Blade - knife
Intended Use: hunting / sporting
Blade: SK-5 High Carbon Steel
Wire Type: floor
Production Lama China
Handle: -
Blade length: 170mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 310mm.
Balance: -
Weight: 284g.
Closing: -
Clip: -
Sheath: Secure-Ex with flint magnesium includedCS95BBUSK -
Randall Messer - Modell 1-7" - Micarta Fingerrillen - PRIVATSAMMLUNG - Sammlermesser
MESSER AUS EINER PRIVATSAMMLUNG
* Typ: Zuvor gekauft
* Zustand: Sehr guter Zustand
* Schärfung: Original
* Markierungen auf der Klinge: Keine
* Markierungen auf dem Griff: Keine
* Verpackung: -
* Scheide: original, Leder, in sehr gutem Zustand
* Handbücher, Zertifikate und Garantien: - - * Geprüft und zertifiziert durch unser hauseigenes Labor.
* Geprüft und zertifiziert durch unser hauseigenes LaborDas Randall Model 1 Fighter war eines der ersten Modelle, die in Randalls Werkstatt in Orlando hergestellt wurden. Ein von Bo Randall selbst gefertigtes Modell 1 diente als Prototyp für das Springfield Randall, das von der Northampton Cutlery Company in der Nähe von Springfield, Massachusetts, in den Jahren 1943 und 1944 für das US-Militär hergestellt wurde.
Verwendungszweck: taktisch / militärisch
Art der Herstellung: handgefertigt
Herstellungsland: USA
Klinge: Voller Erl aus rostfreiem Stahl 440B
Klingenfinish: satinierte Oberfläche
Griff: Messing-Durchsteckschutz und monolithischer Micarta-Griff
Klingenlänge: 177 mm.
Dicke der Klinge: 5mm.
Gesamtlänge: 295 mm.
Balance: auf der Wache Zweig
Gewicht: 350g.
Scheide: Gürtel, schwarzes Leder
Anmerkungen: Zuvor gekauftes Messer, aus einer Privatsammlung zurückgezogenAP-RK-1-7MFG -
Aitor - Ferfal Outdoormesser - N680 Stahl - 16099 - Messer
Verwendungszweck: Kollektion / Outdoor
Klinge: Vollerl aus Edelstahl N680 bei 57 / 58HRC
Griff: Aus Metall
Klingenlänge: 170 mm.
Klingenstärke: 5 mm.
Gesamtlänge: 295 mm.
Gewicht: 367g.
Scheide: aus Polymeren und Cordura mit folgendem Zubehör:* Skinner
* Wetzstein
* Survival-Kit beinhaltet:
- Angelausrüstung
- Flickzeug
- Skalpell
- Gewürze
- Pinzette
Verpackung: Karton mit Aitor-LogosAI-16099 -
Böker - Magnum Collection 2020 - Limited Edition - 02MAG2020 - Messer
Bestimmungsgemäße Verwendung: Sammlung / Dienstprogramm
Art der Produktion: Industrie
Produktionsland: Taiwan
Klinge: aus Stahl D2
Klingenende: sandgestrahlt
Griff: G10
Klingenlänge: 173 mm.
Klingenstärke: 5mm.
Gesamtlänge: 324 mm.
Gewicht: 459 g.
Scheide: aus schwarzem Leder
Verpackung: Geschenkbox mit Garantieschein und Mikrofaser-Reinigungstuch
Anmerkungen: Limitierte und nummerierte Auflage von 1999 Exemplaren - Entwurf von Dietmar Pohl (Pohl Force)BO-02MAG2020 -
Smith & Wesson - USA SW-610 Caper Skinner Erstes Produktionsmesser - Jagdmesser
Verwendungszweck: Sport
Art der Produktion: industriell
Klinge: Full Tang aus 440 Edelstahl
Klingenbehandlung: -
Lama-Produktion: USA
Griff: Krypton
Klingenlänge: 65mm.
Klingenstärke: 4 mm.
Länge geschlossen: -
Gesamtlänge: 197mm.
Balancing: -
Gewicht: 100 g
Schließung: -
Clip: -
Scheide: Leder
Anmerkung: Ende der 90er Jahre "SW-61085,00€Nicht lieferbar -
Chris Reeve - Mk IV 28 Year Commemorative knife - messer
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Takeshi Saji - Kurosameshotou traditionelles Messer - handgemachtes Messer
Takeshi Saji wurde 1948 in Takefu (Präfektur Fukui) geboren, einer Stadt, die sich ungefähr im Zentrum Japans befindet und sich seit Jahrhunderten im Herzen eines Gebiets befindet, das sich der Herstellung von Klingen widmet. Seine Werkstatt ist immer noch dort und um den Ofen herum gebaut, dank derer Takeshi Saji seit einigen Jahren Stahl (insbesondere Damaskus) schmiedet, mit dem er verschiedene Modelle traditioneller japanischer Messer herstellt. Die Wahl der Materialien für die Oberflächen (hauptsächlich natürlich), die wesentlichen Linien - die an die Verwendung erinnern - und die chromatischen Kombinationen seltener Wirkung machen seine Kreationen einzigartig und unverkennbar im Panorama des Weltbestecks und haben ihm zu Hause das Prestige eingebracht Titel des Meisters.
Verwendungszweck: Sammlung / Sport
Art der Herstellung: Handwerker
Produktionslama: Japan
Klinge: Handgeschmiedeter 64HRC Hitachi Shirogami Kohlenstoffstahl
Klingenbehandlung: -
Griff: traditionelles Japanisch, Rochenhaut und Rattan
Klingenlänge: 56 mm.
Klingenstärke: 4mm.
Geschlossene Länge: -
Gesamtlänge: 184mm.
Dick im geschlossenen Zustand: -
Auswuchten: -
Gewicht: 100 g.
Abschluss: -
Clip: -
Scheide: Leder
Verpackung: Karton
Anmerkungen: vollständig von Takeshi Saji handgefertigtTS-10698 -
Citadel - True Knife - coltello artigianale
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10635 -
Cold Steel - Military Classic San Mai III - 14R1J
Destinazione d'uso: light utility/tattico
Tipo di produzione: industriale
Produzione Lama: Japan
Lama: in acciaio inox SanMai III VG-1
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 178mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 302mm.
Spessore da chiuso: -
Bilanciatura: sul ramo di guardia
Peso: 264g.
Chiusura: -
Clip: -
Fodero: in cuoio marrone, con pietra per affilare
Confezione: astuccio di cartone blu con loghi cold steel
Note: -4289 -
White River Knife & Tool - Scout - Black G10 - coltello
La Coltelleria Collini è distributore ufficiale per l'Italia dei coltelli White River Knife & Tool
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Artigianali
Produzione Lama: USA
Lama: in acciaio inox CPM-S30V 58/60HRC
Trattamento Lama: -
Manicatura: G-10
Lunghezza lama: 65mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 80g.
Chiusura: -
Clip: -
Fodero: in Kydex
Confezione: Scatola di cartone con loghi WRKT
Note: -6243B